User's Manual

Digital Multimeter

Safety Information

• Examine the case before you use the Product. Look for

cracks or missing plastic. Carefully look at the insulation

around the terminals.

• Do not use and disable the Product if it is damaged.

• Do not use the Product if it operates incorrectly.

• Do not use the Product in damp or wet environments.

• Keep fingers behind the finger guards on the probes.

• Measure for hazardous voltage without the Low-Pass Filter.

WCaution

To prevent possible damage to the Meter or to the equipment

under test, follow these guidelines:

• Disconnect circuit power and discharge all high-voltage

capacitors before you do resistance, continuity, diodes, or

capacitance tests.

• Use the correct terminals, function, and range for all

measurements.

• Before you measure current, check the fuses of the Meter.

(See “Fuse Test”.)