Data Sheet
Technical Data
Fluke 27 II and 28 II:
Rugged IP 67 Industrial Multimeters
The NEW Fluke 27 II and 28 II digital multimeters define a new stan-
dard for operating in harsh conditions with the features and accuracy
to troubleshoot most electrical problems. Both meters have IP 67
(waterproof and dustproof) rating, MSHA approval, extended operating
temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to
20 minutes) and 95 % humidity, and have been designed and tested to
withstand a 3 m (10 ft) drop. The new Fluke 20 Series
Multimeters are built to work in the toughest environments.
• Measure up to 1000 V ac
and dc
• Measure up to 10 A (20 A for
30 seconds)
• 10,000 µF capacitance range
• Frequency to 200 kHz
• Extended ac voltage band-
width–15 Hz to 20 kHz (28 II),
40 Hz to 30 kHz (27 II)
• Built in thermometer conve-
niently allows you to take
temperature readings without
having to carry a separate
instrument (28 II)
• Resistance, continuity and
diode test
• Min/Max and average record-
ing to capture variations
automatically
• Peak min-max (28 II)
• Unique function for accurate
voltage and frequency mea-
surements on adjustable speed
motor drives and other electri-
cally noisy equipment (28 II)
Features
• New – IP 67 waterproof &
dustproof protection, com-
pletely sealed for use in harsh
environments
• Designed to withstand 3 meter
drop (with holster)
• Hi resolution 20,000 count dis-
play mode (28 II)
• True-rms ac voltage and cur-
rent for accurate measurements
on non linear signals (28 II)
• Average responding voltage
and current for measurements
(27 II)
• New – Backlit keypad buttons
allow for easy visibility in low-
lit areas
• Large display digits and 2
level bright white backlight for
increased visibility
• Reversible holster for added
protection when not in use
• Withstands hazardous 8,000
volt spikes caused by load
switching and faults on indus-
trial circuits and complies with
second edition IEC and ANSI
electrical safety standards
• Long battery life (800 hours)
• Relative mode to remove test
lead resistance from low ohms
measurements
• Auto and manual ranging for
maximum flexibility
• Optional magnetic hanger for
easy setup and viewing while
freeing your hands for other
tasks
• MSHA approved
MSHA
United States Department of Labor
M ne Safety and Health Administ ation