Brochure

Best for Applications Recommended DMM
Compact meters
Wide variety of electrical
work
Electrical maintenance troubleshooting: When you need to eliminate false or
“ghost” voltages or perform continuity, connection or basic wiring checks.
117
Non-contact voltage detection: Integrated non-contact voltage detection
simplifies many tasks.
HVAC troubleshooting Residential HVAC maintenance: Lower voltage HVAC residential maintenance,
installation and troubleshooting.
116
Temperature and microamp measurements: Troubleshooting problems with
HVAC equipment and flame sensors.
Electronic and field
service applications
Electronic troubleshooting: Troubleshoot a wide variety of measurement
parameters, including frequency and capacitance.
115
Utility applications
involving basic electrical
tests
Revenue meter tests: Involving meter sets and reconnects, capacitor checks,
detection of absence or presence of voltage, and for continuity, connections or
basic wiring checks.
113
Simultaneous voltage and continuity checks: Check LoZ low impedance
function allows users to check voltage and continuity simultaneously.
Specialty meters
Harsh environments
requiring dustproof and
waterproof test equipment
Industrial troubleshooting in indoor and outdoor harsh environments:
Dustproof, waterproof, shockproof multimeter designed to withstand the
toughest environments.
28 II/
27 II
Working on VSDs: Take accurate voltage, current and frequency measurements
on the output side of the drive at either the drive itself or at the motor
terminals. (28 II only)
Industrial troubleshooting
in explosive environments
Safety and compliance: The Fluke 28 II Ex The Model MX57EX TRMS is an
intrinsically safe digital multimeter designed for use in dangerous or explosive
atmospheres. Agency Approvals: IECEx Ex ia IIC T4 Gb, Ex ia IIIC T130 °C Db, I
M1 Ex ia I Ma
87V Ex
Industrial troubleshooting: Completely sealed, IP67 rated case; Withstands
drops up to 10 feet or 3 meters (with holster); Dustproof per IEC60529 IP6x;
Waterproof per IEC60529 IPx7; Meets IEC Overvoltage Electrical Safety
Standard No. 61010-1:2001
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa +31 (0) 40
2675 200 or Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com
©2008-2014 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 3/2012 3272127C-en
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke. Keeping your world up and running.
®