User's Manual

True RMS Multimeters
International Electrical Symbols
3
International Electrical Symbols
The following international symbols appear in this document and on the Meter.
B
AC (Alternating Current)
J
Earth ground
F
DC (Direct Current)
I
Fuse
F
B
AC or DC
P
Conforms to European Union directives
W
Risk of danger. Important Information.
Refer to the manual.
$
Conforms to relevant Canadian Standards
Association directives
X
Hazardous Voltage
T
Double insulated
s
Technischer Überwachungs Verein.
German certifying body.
!
Underwriters Laboratories, Inc.
Meter in accordance with IEC 61010-1. 54CJ
b
Battery. Low Battery when shown on
display.
;
Conforms to relevant Australian standards
#
Verband Deutscher Electroniker. German
electronics association.
~
Do not dispose of this product as unsorted
municipal waste. Go to Fluke’s website for
recycling information.
Test Lead Alert
XWWarning
Personal injury or damage to the Meter can occur if the user attempts to make a
measurement with a lead in an incorrect terminal.
As a reminder to check that the test leads are in the correct terminals, LEAd is displayed when the Rotary
Switch is moved to or from the
mA or A position.