User's Manual

1760
Getting Started Manual
2
Symbols
Table 1 shows the symbols used on the instrument and/or
in this manual.
Table 1. Symbols
Symbol Description
X
Hazardous voltage. Risk of electric shock.
W
Important information. See manual.
-
Do not apply around or remove from
HAZARDOUS LIVE conductors.
J
Earth ground.
T
Double insulation.
B
AC (Alternating Current)
F
DC (Direct Current).
P
Conforms to requirements of European
Union.
)
Canadian Standards Association is the
certified body used for testing compliance
to safety standards.
~
Do not dispose of this product as unsorted
municipal waste. Go to Fluke’s website for
recycling information.
;
Conforms to relevant Australian
Standards.
CAT II IEC Overvoltage Category/Measurement
Category II equipment is designed to be
protected against transients from socket
outlets and similar points.
CAT III IEC Overvoltage Category III equipment is
designed to protect against transients in
installations, such as distribution panels,
feeders and short branch circuits, and
lighting systems in large buildings.
CAT IV IEC Overvoltage Category IV equipment is
designed to protect against transients from
the primary supply level, such as an
electricity meter or an overhead or
underground utility service.