User's Manual

1760
Getting Started Manual
6
Accessories
Only use the accessories supplied with the device or
specifically available as optional equipment for your model.
Ensure that any third-party accessories used in
conjunction with the device conform to IEC 61010-031/-2-
032 standard and are suitable for respective measuring
voltage range.
Risks During Operation
Ensure that the connected devices work properly.
Measurement sensors must not be connected to unfused
circuits.
Connectors with locking mechanism have to be locked
firmly.
Device Shutdown
If you detect any damage to the housing, controls, power
cable, connecting leads or connected devices,
immediately disconnect the measuring inputs of the unit
and then from the power supply.
If you are in doubt as regards the safe operation of the
device, immediately shutdown the unit and the respective
accessories, secure them against inadvertent switching on
and bring them to an authorized service agent.
Safety Instructions on Device Housing
The mains connection must conform to the ranges/values
as inscribed on the instrument labels.
emv02.wmf
Figure 2. Instrument Label