User's Manual

1760
Reference Manual
3-2
Ethernet LAN Communication with DHCP Support
1. Power up the Recorder and connect it to your local area network. A valid IP
address will automatically be assigned.
2. Launch PQ Analyze operating and evaluation software.
3. Close the Start Menu by clicking Cancel.
4. Open the TransferFluke 1760/Search Devices menu:
transfer2000.bmp
5. If your computer has multiple network interfaces installed, select the local area
network interface from the Network list. Click Search. After some seconds, the
list of instruments found in the local area network will be displayed.
SearchDevices_US.bmp
6. Select your instrument and press Connect to establish a connection between the
Recorder and your computer. The status line shows information about the
connection.
status line.bmp
With the Save button, a screen is opened to display the station list: