User's Manual

1760
Reference Manual
5-30
nlv1.bmp
Working with Templates
The software comes with a number of templates in the form of .vdf files, which have
been preconfigured for certain applications. These files are stored in the configuration
Templates folder on your PQ Analyze CD-ROM. If you wish to use these templates
frequently, copy them into the PQ Analyze subdirectory of your <Personal> Directory
(see “Installation Paths” in Chapter 2): <Personal>|PQAnalyze|vdf|
The general templates (*.vdf) can be customized to suit your specific requirements, and
then saved as your own templates. Open the template with the File > Open menu. Make
changes to the settings. Press the Save button and save the template under a different
name.
Flicker.vdf Template
This trigger configuration is used for the recording of Flicker. It responds if the absolute
values are exceeded, and if voltage fluctuations between two intervals occur. It might be
necessary to reduce the level to a smaller value, depending on the measuring conditions.