User's Manual

Manual Supplement

Manual Title: 1760 Getting Started Supplement Issue: 2

Part Number: 2713103 Issue Date: 2/14

Print Date: June 2006 Page Count: 2

Revision/Date: 2, 7/10

This supplement contains information necessary to ensure the accuracy of the

above manual.

PAGE 1
Manual Supplement Manual Title: Part Number: Print Date: Revision/Date: 1760 Getting Started 2713103 June 2006 2, 7/10 Supplement Issue: Issue Date: Page Count: 2 2/14 2 This supplement contains information necessary to ensure the accuracy of the above manual. © 2011-2014 Fluke Corporation. All rights reserved.
PAGE 2
1760 Getting Started Manual Supplement Change #1 On page 6, replace Figure 2 with: emv02.wmf Figure 2. Instrument Label Change #2 On page 1, under Safety Instructions, replace the first sentence with: The design and manufacture of the device conform to the latest state of technology and the safety standards laid down in IEC 61010-1 and IEC 61010-2-30. On page 2, add the following to the Symbols table:  2/14 Conforms to relevant South Korean EMC Standards.
PAGE 3
Manual Supplement 1760 Getting Started On page 8, replace the 7th bullet with: 1 crossover Ethernet cable for direct-PC connection (RJ45 crossover cable, do not use the gray plug). On page 14, under Communicating with the Recorder, replace the second paragraph with: Supply the Recorder with mains power, switch it on, connect a voltage sensor to channel 1 and connect the network interface to your PC using the Ethernet cable for direct connection (RJ45 crossover cable, do not use the gray plug).