User's Manual

PC Software for 1740 Series
PQ Log Feature Reference
27
3. Define the type of the connected Logger. Be very careful that your selection
matches the Logger type that you are using. If you select an improper type, the
results could be unpredictable.
Details such as the Type, Mains Frequency, and Order Reference are displayed
on rear panel of the Logger.
The next field defines the nominal mains frequency. Enter the nominal power
frequency of the system in which the Logger should be used in the following
measurements.
4. Click OK to start the firmware transfer.
5. Click OK to start normal operation.
Information about the Logger
This screen provides information on the current status of the Logger: hardware and
software version details.
egd015k.bmp
Figure 19. Information About the Connected Logger
Status
Provides information about the job:
• Number of intervals
• Number of statistics