User's Manual

PQ Log
Users Manual
8
egd007.bmp
Figure 7. Summary Screen
15. Once you are satisfied that the settings are correct, save these settings to a
template for later recall by clicking on the PC Save or Save As button. To write
the setup data to the Logger, click on the Logger Save button. If you want to
make sure you are not about to delete any important data, download the data
before you send the job setup information to the Logger.
egd008.bmp
Figure 8. Warning Message Before Sending Setup Information
16. Click on the Yes (Continue) button. A message tells you that the settings have
been saved successfully.