User's Manual

PQ Log
Users Manual
2
• Mains signaling voltage
• V Unbalance (Positive sequence/negative sequence harmonics)
• Line (mains) frequency
Activities You Can Do with PQ Log
The activities that you can do with PQ Log are:
• Prepare the Logger for use, connected to the Logger, or in advance
• Monitor live data from the Logger
• Download recorded logged data to the PC
• View, print, and export timeplots of all channels
• Application-oriented analysis (sets of parameters to graph to achieve different
typical analysis tasks)
• Perform harmonic studies
• Perform statistical analysis
• Generate data tables
• Print tables, graphs, and comprehensive, formatted reports
• Export data to an ASCII file
• Upgrade the Logger’s Firmware (operating software) when a new release is
available on the Fluke website
• Perform standardized analysis of measured values according to the European
standard EN 50160
System Requirements
Table 1 shows the minimum computer requirements for PQ Log.
Table 1. System Requirements
PC Configuration for PQ Log Necessary Recommended
Free hard disk space 10 MB >50 MB
CD-ROM drive }
Monitor 800 x 600 pixels 1024 x 768 pt
Serial interface, or a serial-to-USB interface
adapter and the USB adapter manufacturer’s
driver software for the adapter
}
Windows

NT, 2000, XP or later version }
Color printer }
Installing PQ Log
Insert the Logger’s product CD into the CD-ROM drive. If your CD-ROM drive is
configured for Autorun, the installation starts automatically. If not, run the Launch.exe
program on the CD-ROM. Follow the instructions on the screen to install PQ Log in your
choice of language.