User's Manual

Certificate:
2686208
Master Contract:
162029
Project:
2686208
Date Issued:
May 14, 2014
DQD 507 Rev. 2012-05-22 Page: 2
CONDITIONS OF ACCEPTABILITY
(1) If at any time there is a conflict between the system safety provisions and any relevant local (national or
regional) requirements, the local requirements always take precedence.
(2) Equipment is not to be used with flammable liquids.
APPLICABLE REQUIREMENTS
CAN/CSA-C22.2 No. 61010-1-12 - Safety Requirements for Electrical Equipment for Measurement, Control,
and Laboratory Use, Part 1: General Requirements
CAN/CSA-C22.2 No. 61010-2-030-12 - Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 2-030: Particular requirements for testing and measuring circuits
UL Std. No. 61010-1 (3rd Edition) - Safety Requirements for Electrical Equipment for Measurement, Control,
and Laboratory Use - Part 1: General Requirements
UL Std. No. 61010-2-030 (1st Edition) - Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 2-030: Particular requirements for testing and measuring circuits
Reference Standards:
IEC 61010-1:2010 - Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory
Use - Part 1: General Requirements
IEC 61010-2-030:2010 - Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use - Part 2-030: Particular requirements for testing and measuring circuits