Data Sheet

System requirements
•
Pentium 90 or better
•
CD-ROM drive
•
Microsoft
®
Windows
®
(2000 and beyond)
•
One free RS232 port or USB port
•
PM9080 optically isolated RS232 adapter/cable, or:
•
OC4USB optically isolated USB interface adapter/
cable, available separately or included in SCC120/
SCC190 kit and in ScopeMeter “S” versions
Supported instruments
Full support for Fluke 199C, 199B, 199, 196C, 196B,
196, 192B, 192, 125, 124 and 123.
Starting release V4.5, the Fluke 225C, 215C and 192C
are supported.
FlukeView
®
ScopeMeter
®
Software for Windows
®
ScopeMeter 215C, 225C and 190C Series, 120 Series Fluke Corporation 7
Input voltage ratings
Maximum input voltage: CAT III 600 V
(Maximum voltage between input and reference lead)
Maximum input voltage using VPS40 Probe:
CAT III 600 V, CAT II 1000 V (Maximum voltage
between probe tip input and reference lead)
Floating voltage: CAT III 600 V
(Maximum voltage between earth ground and any
terminal [signal input or reference lead])
Maximum voltage between reference leads:
Instrument has common grounds connected via
self recovering fault protection. For different ground
potential measurements between inputs, use DP120
differential voltage probe or a Fluke 190C Series
instrument.
Environmental
According to MIL-PRF-28800F, Class 2
Operating temperature: 0 °C to +50 °C
Storage temperature: -20 °C to +60 °C
Humidity: 10 °C to 30 °C, 95% RH non condensing;
30 °C to 40 °C, 75% RH non condensing;
40 °C to 50 °C, 45% RH non condensing
Maximum operating altitude: 2,000 m (6,500 ft)
4,500 m (15,000 ft) voltages ≤ 300 V
Maximum storage altitude: 12 km (40,000 ft)
Electro-Magnetic-Compatibility (EMC):
EN61326-1 for emissions and immunity
Optically isolated PC/printer interface
To printer: Supports HP Laserjet
®
, Deskjet
®
, Epson
FX/LQ and postscript printers via optional PAC91
To PC: Transfer instrument settings, screen images
and data, compatible with FlukeView
®
software for
Windows
®
via optional OC4USB (USB) or PM9080
(RS-232) interface cable.
Warranty
Three-years (parts and labor) on main instrument
One-year on accessories
FlukeView ScopeMeter software helps you
get more out of your ScopeMeter:
•
Store instrument’s screen copies on the PC, in color
(with Fluke 190C-Series only) or in black and white
•
Copy screen images into your reports and
documentation
•
Capture and store waveform data from your
ScopeMeter on your PC
•
Create and archive waveform references for
automatic (Fluke 190C Series) or visual
(Fluke 190B and 190C Series) comparison
•
Includes waveform analysis, e.g. FFT spectrum
analysis
•
Copy waveform data into your spreadsheet for
detailed analysis
•
Use cursors for parameter measurement
•
Extended recording of up to four user-selected
measurements help you monitor and analyze slow
moving signals and related events
•
Logging of other readings directly into other
application programs, eg., spreadsheet
•
Add user text to instrument setups and send
these to the instrument for operator reference and
instructions
•
Capture complete Replay sequence into the PC for
further analysis and documentation (Fluke 190C
Series)
•
English, French and German versions included on
a single CD-ROM
Note: Some functionality may be available with specific ScopeMeter
models only