Data Sheet

Selection guide
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com
©2001-2010 Fluke Corporation. Specifications subject
to change without notice. Trademarks are the
property of their respective owners. Printed in U.S.A.
1/2010 1629083H D-EN-N
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke.Keeping your world
up and running.
®
Color ScopeMeter 215C, 225C Color ScopeMeter 190C Series ScopeMeter 120 Series
Fluke 225C Fluke 215C Fluke 199C Fluke 196C Fluke 192C Fluke 125 Fluke 124 Fluke 123
Bandwidth 200 MHz 100 MHz 200 MHz 100 MHz 60 MHz 40 MHz 40 MHz 20 MHz
Max. real time sample rate 2.5 GS/s 1 GS/s 2.5 GS/s 1 GS/s 500 MS/s 25 MS/s 25 MS/s 25 MS/s
Max equivalent time
sample rate
–
2.5 GS/s 2.5 GS/s 1.25 GS/s
Display 14.4 cm Full Color LCD 10.2 cm monochrome LCD
Digital persistence Yes, gives analog oscilloscope like waveform decay (user selectable) –
Envelope mode Yes Yes
Waveform compare Visual Reference and Automatic ‘Pass / Fail’ testing –
Max record length
in Scope mode:
in ScopeRecord mode:
3000 points per input channel, allowing for high time resolution signal analysis using
Zoom; 27,500 points per input or more (5 ms/div...2 min/div.)
512 min/max points per input
Number of inputs 2 plus external / DMM input, all isolated from each other and from ground 2; opt. Isolated External Trig. thru ITP120
Number of digitizers 2 2
Independently floating
isolated inputs
Up to 1000 V between inputs, references and ground –
Input sensitivity 2 mV/div. ...100 V/div. 5 mV/div. 500 V/div.
Glitch capture Up to 3 ns using Pulse Width triggering; 50 ns peak detect at 5 μs/div. to 1 min/div. 40 ns
Timebase range in scope
mode
5 ns/div. to 2 min/div.
10 ns/div. ...
2 min/div.
10 ns/div. ...1 min/div.
20 ns/div. ...
1 min/div
Trigger types
Connect-and-View
™, Free Run, Single Shot, Edge, Delay, Video Frame, Video Line,
Selectable pulse width and External. Dual slope trigger and Event trigger (n-cycle)
Connect-and-ViewTM, Free Run, Single Shot,
Edge, Video
Scope measurements
7 cursor measurements, 30 automatic measurements Automatic Vrms
and watts measurement on cursor limited part of waveform
As 124 +
Power,
VA, VAR, PF,
RPM, Vpwm;
THD
Cursor + 26
Automatic
measurement
26 automatic
measurements
Bus health test function
Signal validation and eyepattern
mode for standard industry buses
–
For standard
industry buses
–
Waveform mathematics
A + B, A - B, A x B, A versus B (X-Y-mode, giving Lissajous diagrams)
Frequency Spectrum (FFT)
Harmonics
mode
–
Power measurements P (W), VA, VAR, PF
Power, VA, VAR,
PF, Vpwm
–
ScopeRecord trigger
modes
Start on trigger, stop on trigger –
Capture last 100 screens Automatic, with replay capability –
Dual input TrendPlot Yes, with cursors and zoom Yes, with cursors Yes
Memory for screens/
set-ups
10 screens and set-ups;
5 more memories are made available upon registration of the ScopeMeter
20 10
Memory for recordings Two, each can store 100 scope screens, a ScopeRecord or a TrendPlot
True-rms multimeter 5000 counts, volts, amps, ohms, continuity, diode, temp Dual fully featured 5000 counts DMM
Safety certified
(EN61010-1)
1000 V CAT II/600 V CAT III (instrument and included accessories)
600 V CAT III
(Instrument and included accessories)
Battery (installed) 4 hr Ni-MH (BP190) 7 hr Ni-MH (BP120MH)
BHT190 bus health
adapter set
Included – Optional –
Line power Adapter / battery-charger included (BC190) Adapter / Battery charger included (PM8907)
Size 25.6 cm x 16.9 cm x 6.4 cm 23.2 cm x 11.5 cm x 5.0 cm
Weight 2 kg 1.2 kg
PC and printer interface Using optional optically insulated adapter/cable OC4USB (USB) or PM9080 (RS-232)
Warranty Three years on main instrument, one year on the standard accessories