Data Sheet

Measurement
voltage
category Summary description
CAT IV Three phase at utility connection, any outdoor
conductors (under 1,000 V)
• Outside and service entrance
• Service drop from pole to building
• Run between meter and panel
• Overhead line to detached building
• Underground line to well pump
CAT III Three-phase distribution (under 1,000 V),
including single phase commercial lighting
and distribution panels
• Feeders and short branch circuits
• Distribution panel devices
• Heavy appliance outlets with “short”
connections to service entrance
CAT II Single-phase receptable connected loads
• Outlets and long branch circuits
• All outlets at more than 10 m (30 ft)
from Category III source
• All outlets at more than 20 m (60 ft)
from Category IV source
CAT I Electronic
• Electronic equipment
• Low energy equipment with transient
limiting protection
To protect your instrument and—more importantly—
yourself, choose a test tool that can withstand the
electrical hazards present in the environment in which
you plan to use it.
EN61010 establishes international safety require-
ments for electrical measurement equipment. It
separates the various electrical environments into
installation categories based on the danger from
International safety standards
high-voltage energy transients. To choose the right
tool, the voltage rating alone does not determine the
safety. It is the combination of voltage rating and
installation category that determines maximum tran-
sient withstand capability of the tool. CAT III rated
instruments are recommended for measurement on
industrial power distribution systems.
Ordering information
SCC kit includes: Hard-shell carrying case, optically isolated USB
interface cable, and FlukeView
®
for Windows
®
software.
Fluke 225C Color ScopeMeter (200 MHz/2.5 GS/s) with Bus Health Test Functions
Fluke 225C/S Color ScopeMeter (200 MHz/2.5 GS/s) with Bus Health Test + SCC190 kit
Fluke 215C Color ScopeMeter (100 MHz/1 GS/s) with Bus Health Test Functions
Fluke 215C/S Color ScopeMeter (100 MHz/1 GS/s) with Bus Health Test + SCC190 kit
Fluke 199C Color ScopeMeter (200 MHz/2.5 GS/s)
Fluke 199C/S Color ScopeMeter (200 MHz/2.5 GS/s) + SCC190 kit
Fluke 196C Color ScopeMeter (100 MHz/1 GS/s)
Fluke 196C/S Color ScopeMeter (100 MHz/1GS/s) + SCC190 kit
Fluke 192C Color ScopeMeter (60 MHz/500 MS/s)
Fluke 192C/S Color ScopeMeter (60 MHz/500 MS/s) + SCC190 kit
Fluke 125 Industrial ScopeMeter (40 MHz)
Fluke 125/S Industrial ScopeMeter (40 MHz) + SCC120 kit
Fluke 124 Industrial ScopeMeter (40 MHz)
Fluke 124/S Industrial ScopeMeter (40 MHz) + SCC120 kit
Fluke 123 Industrial ScopeMeter (20 MHz)
Fluke 123/S Industrial ScopeMeter (20 MHz) + SCC120 kit
SCC190 FlukeView
®
Software + Cable + Case (190 Series)
SCC120 FlukeView
®
Software + Cable + Case (120 Series)
PM9080 Optically Isolated RS-232 adapter/cable
OC4USB Optically Isolated USB interface cable
DP120 Differential Voltage Probe for Fluke 120 Series
BHT190 Bus Health Test break-out adapter for DB-9, RJ-45 and M12 connection systems
ITP120 Optically Isolated External Trigger Input for Fluke 120 series
SW90W FlukeView
®
ScopeMeter Software for Windows
®
C190 Hard Shell Carrying Case for Fluke 190 series
C120 Hard Shell Carrying Case for Fluke 120 series
ScopeMeter 215C, 225C and 190C Series, 120 Series Fluke Corporation 9