Datasheet

Additional Key Specifications
FiberInspector probe specifications
Magnification ~ 200X with OptiFiber Pro Display
Light source Blue LED
Power source TFS mainframe
Field of View (FOV) Horizontal: 425 µm, Vertical: 320 μm
Minimum detectable particle size 0.5 µm
Dimensions Approximately 6.75 in x 1.5 in (1175 mm x 35 mm) without adapter tip
Weight 200 g
Temperature range Operating: 32°F to 122°F (0 °C to +50 °C), Storage: -4°F to +158°F (-20°C to +70°C)
VFL specifications
On/Off control Mechanical switch and a button on the touch screen
Output power 316 µW (-5 dBm) ≤ peak power ≤ 1.0 mW (0 dBm)
Operating wavelength 650 nm nominal
Spectral width (RMS) ±3 nm
Output modes Continuous wave Pulsed mode (2 Hz to 3 Hz blink frequency)
Connector adapter 2.5 mm universal
Laser safety (classification) Class II CDRH Complies to EN 60825-2
For complete kit configurations, please visit www.flukenetworks.com/orderopro
Technical Specifications
General specifications
Weight Mainframe with module and battery: 3 lbs, 5 oz (1.28 kg)
Dimensions Mainframe with module and battery: 2.625 in x 5.25 in x 11.0 in ( 6.67 cm x 13.33 cm x 27.94 cm)
Battery Lithium ion battery pack, 7.2 volts
Battery life 8 hr Auto OTDR operation, dual wavelength no video probe connected, 150 m of fiber
Charge Time
Tester off 4 hours to charge from 10% to 90% capacity
Tester on 6 hours to charge from 10% to 90% capacity with the tester on
7 of 10