Datasheet

Copper and Fiber Technician’s Kit
CableIQ
™
Qualification Tester and SimpliFiber
®
Pro
Model Description
CIQ-FTKSFP Copper and Fiber Technician’s Kit –
includes the CableIQ (CIQ-KIT) and
SimpliFiber Pro (FTK1000)* Fiber Test Kit
SFSINGLEMODESOURCE SimpliFiber Pro singlemode source
FT525 Video microscope Inspect fiber end-faces for the #1 cause of
link failures – microscopic contamination
FT120 Optical microscope Inspect fiber end-faces for the #1 cause of
link failures – microscopic contamination
VISIFAULT VFL to verify and locate faults
NFC-KIT-BOX Fiber end-face cleaning supplies
Ordering information
Technical Specifications
CableIQ™ Qualification Tester and SimpliFiber® Pro
As an IT professional responsible for managing a hybrid copper and
fiber network, you have a challenging job. You are an on-the-spot
problem-solver and are always planning for future enhancements,
working with both copper and fiber to seamlessly upgrade the
network to higher speeds while continuously troubleshooting and
optimizing the current infrastructure. To meet your growing project
requirements and your shrinking personnel and budgetary resources,
Fluke Networks’ Copper and Fiber Technician’s Kit provides a robust
set of tools to help you expertly manage your network to keep
it running smoothly – and inexpensively. The Copper and Fiber
Technician’s Kit pairs CableIQ and SimpliFiber Pro to provide all
the testing and troubleshooting instruments you need to:
Copper
 •Quicklyqualifybandwidth(10/100,VoIP,orGigabitEthernet)
of any cabling link
 •Troubleshootcablingperformancefaultssuchascrosstalkor 
impedance changes
 •Graphicallymapwiringcongurationandshowdistanceto 
cabling faults
 •Discovernetworkdevicesanddisplaydeviceconguration 
  (speed/duplex/pairing)
 •AccuratelylocatecablesandwiresusingIntelliTone™digital 
signaling technology
 •Saveupto250testresults
Fiber
 •Quicklyverifyopticallossandpowerlevelswithsingle-port,
simultaneous dual wavelength testing over six wavelengths
(850, 1300, 1310, 1490, 1550, 1625)
 •ConductefcientcableroutingidenticationwithSimpliFiber 
Pro’s FindFiber® capability
 •Saveupto1,000testresultsanduploadandmanagethemon 
your personal computer via Fluke Networks’ popular LinkWare
Cable Test Management Software
 •TrackintermittentpoweructuationswiththeMin/Maxfeature
CableIQ™ Specifications
Cable types supported UTP, STP, FTP, SSTP, RG6, RG59, audio,
security
Qualification autotests 1000BASE-T, 100BASE-TX, 10BASE-T, VoIP,
1394b S100, TELCO, Wiremap only, Coax
Supported tests Wiremap, length, cable signal performance,
digital toner, analog toner, Ethernet port
detection and identification, analog tele-
phone detection, blink port light, continu-
ity, speaker test, cable fault finding, video
signal detection
Wiremap Can detect single wire faults and supports
MultiMap mode with up to seven remote
office identifiers. Draws proportional wire
length to breaks. Detects Split Pairs.
Find fault Measures crosstalk and impedance
and compares against appropriate lim-
its based on qualification test selected.
Detects location of large point sources as
well as distributed sources in the cabling
if they are sufficient to disqualify the
application.
Results storage Up to 250 qualification test results
Power Battery type: 4 AA (NEDA 15A, IEC LR6)
alkaline batteries
Battery life 20 hours of typical use, without backlight
Other battery types
supported
4AA photo lithium, NIMH, NICAD
Dimensions and weight 7 in x 3.5 in x 1.75 in (17.8 cm x 8.9 cm x
4.5 cm) 1.2 lb (0.55 kg)
*The FTK1000 is a multimode verification kit and includes a multimode source and
power meter.