Datasheet

FindFiber
™
Remote ID Source
FindFiber Source Specifications
Emitter Type Laser
Source Connector Fixed SC
FindFiber Code
Generation
1 through 8. Default is 3.
Power On/Low-battery
Indicator
LED
Power Requirement 2 AA Alkaline batteries
Battery Life > 80 Hours (typical)
Automatic Power Off 30 minutes
Low–Battery Warning LED blinks
Size (L x W x H) 7.1 in x 1.3 in x 1.0 in
(17.9 cm x 3.2 cm x 2.5 cm)
Weight 4.4 oz (125 g)
Safety Meets Class 1 CDRH
Specifications
Technical Specifications
Cost-effective, double-ended testing with one technician
SimpliFiber Pro’s FindFiber Remote ID sources are
valuable accessories that help free your technicians
from tedious cable routing identification to work on
other projects. In the past, multiple technicians were
necessary to monitor both ends of a link to coordinate
and match up fiber combinations over talk sets. Now, a
single technician can perform this work with FindFiber
Remote ID sources and a SimpliFiber Pro power meter.
With FindFiber sources plugged into remote patch-panel
ports or drops that transmit unique identifier signals to
a SimpliFiber Pro power meter on the opposite end, an
individual can easily and quickly identify the physical
location of cabling runs to ensure polarity and the
correct location of each drop at the central panel.
FindFiber Remote ID Source
FindFiber One (1) FindFiber Remote ID source
FindFiber-6 Set of six (6) FindFiber Remote ID sources
FindFiber Remote ID Source is included as a standard
accessory in these kits
FTK1300 Multimode Fiber Verification Kit: includes
SimpliFiber Pro optical power meter, 850/1300
multimode source, VisiFault VFL, FT120 FiberViewer,
FindFiber Remote ID sources, and carrying case; ST
and LC adapter
FTK1350 Multimode Fiber Verification Kit: includes
FT500 FiberInspector Mini: Includes SimpliFiber Pro
optical power meter, 850/1300 multimode source,
VisiFault VFL, FT500 FiberInspector Mini, FindFiber
Remote ID sources, and carrying case; ST and LC
adapter
FTK1450 Complete Fiber Verification Kit: includes FT500
FiberInspector Mini: Includes SimpliFiber Pro
optical power meter, 850/1300 multimode source,
1310/1550 singlemode source, VisiFault VFL, FT500
FiberInspector Mini, two (2) FindFiber Remote ID
sources, and carrying case; ST and LC adapter, NFC-
Kit-Box fiber optic cleaning kit
Ordering information
Fluke Corporation
P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries
worldwide. To find your local office contact details,
go to www.flukenetworks.com/contact.
©
2009 Fluke Corporation. All rights reserved.
Printed in U.S.A. 1/2009 3441653 D-ENG-N Rev A
NETWORKSUPERVISION
Quickly and easily verify mapping to document cable routing.
Patch Panel
Fiber Links
SimpliFiber Pro
meter
ID #3
ID #4
ID #5
Figure 1. Using FindFiber mode to locate fibers –
patch panel to wall outlet
Patch Panel
Patch Panel
ID #6 ID #7 ID #8
SimpleFiber
Pro meter