Datasheet

• Locating potential sources of bit error
rates – reflectance caused by end-face
contamination or poor connections leads
to bit errors. Fiber QuickMap locates these
problem areas.
• “Mapping” the channel – quickly confirm
connectivity by verifying all the links and
connections in your channel.
• Fiber QuickMap is perfect for datacenters
and campus environments up to 1500m.
Fiber QuickMap is perfect for troubleshooting multimode fiber networks by locating causes of fiber failure, network degradation, and mapping
out link connectivity.
When and Where to Use
Fiber QuickMap
Fiber QuickMap™ provides immediate and
in-depth visibility into your enterprise
network’s multimode fiber cabling, making it
the perfect tool for:
• Troubleshooting – Degraded network
performance? Failed a loss test? Poorer
than expected power or loss measurement?
Fiber QuickMap helps you locate the source
of the problem or eliminate cabling as the
culprit. No need to blindly waste time ma-
nipulating lasers or flashlights, then walking
between both ends of the channel.
• Locating breaks or potential “weak” network
cabling areas – dirty connectors and poor
splices can diminish network performance –
or even cause network failure. Fiber
QuickMap points you to these incidents
based on default or user-defined settings
to fix them before they become bigger
problems.