Datasheet

Pro3000 Analog Tone Generator and SmartTone™
Use the SmartTone™ capability of the Pro3000 Tone Generator to identify the right pair. Simply
short the selected pair at the near or far end to change the cadence of the tone generated. The
tone change you hear through the probe can help you identify the correct wire pair. SmartTone™
provides five distinct tones for exact pair identification.
Tone Generator features:
SmartTone™
Send tone signal up to 10 miles on most cables
Line cord features angled bed-of-nails clips and a rugged RJ-11 plug for direct access to
phone and data jacks without adapters
External switch allows selection of solid or alternating tone options, indicated with solid or
flashing LEDs
Continuity Testing
Line polarity confirmation
Pro3000F Filtered Probe features:
Innovative filtered probe obstructs signal of 60 Hz or 50 Hz external interference
Switch between filtered and unfiltered modes with one button press.
Tone and trace wire on non-active networks
Auto-off capability extends battery life
Loud probe speaker is audible in noisy locations
Pro3000 Unfiltered Probe
For technicians that do not require a filtered probe, there is the original Pro3000 Probe. The
ergonomic sleek design is easy to handle and use. Like the Pro3000F Filtered probe, the
Pro3000 Unfiltered Probe features a loud speaker to hear tone clearly through walls, enclosures
and in loud environments. The recessed on/off button helps prevent the probe from accidently
being turned on when stored.
2 of 4