User Manual

1
IT100 IntelliTone

Pro Toner
IT100 IntelliTone

Pro Probe
Overview of Features
The IT100 IntelliTone

Pro toner and probe let you
locate and isolate twisted pair (UTP, Cat 5e, Cat 6), coax
cables (RG6, RG59, and others for CATV/CCTV), bare wire
(such as speaker wire and security network wire), and
Cat 3 telephone cabling. The toner also lets you validate
voice service.
The toner and probe feature both digital and analog
toning and detection. The digital IntelliTone tone is
primarily used on data cables, and on active networks. In
these environments, the digital signal eliminates cable
misidentification due to signal bleed and radiated or
ambient noise.
The analog tone is primarily used on voice cables, and on
bare wire. The SmartTone™ analog technology will
change cadence when a pair is shorted at the far end.
This makes exact pair identification easy and precise.
The IT100 toner and probe also provide standard
functions such as visual and audible signal strength
indication, digital toning/detection, SmartTone analog
toning/detection, and continuity testing.