User Manual

MicroScanner
2
Cable Verifier
Users Manual
20
Viewing Individual Results
To see individual results for each wire pair, use E or D; to
move among the screens.
In this mode, the tester continuously tests only the wire pair
you are viewing.
Figure 14 shows examples of these screens.
A Short on pair 1,2 at 29.8 m.
Notes
On the individual results screens, shorts are shown
only when they are between wires in a pair.
When there is a short, the far-end adapter and the
mapping of the unshorted wires are not shown.
B Pair 3,6 is 67.7 m long and is terminated with the
wiremap adapter.
C Open on pair 4,5 at 48.1 m. The open could be on one
or both wires.