User Manual

6
MicroScanner
2
Getting Started Guide
Connecting to Coaxial Cabling
egs19.eps
Using the Toner
1 Press Y to select twisted pair (U) or coaxial
(
T) cable.
2 Connect the tester to the cable.
3 Press M until L appears on the display.
4 To cycle through the IntelliTone and analog
toner songs, press
E or D.
5 Use an optional IntelliTone probe or an analog
probe to locate the cable.
Notes
If the
PoE indicator appears, see page 7.
Auto shutoff is disabled in toner mode.
Connection
to service
Coaxial patch cords
Wiremap
adapter