User Manual

3
Changing the Length Units
J Telephone voltage indicator. P and N appear in
the wiremap diagram over the positive (tip)
and negative (ring) wires.
K Indicates a wiremap adapter is connected to
the far end of the cable
L Low battery indicator
M Indicates an ID locator is connected to the far
end of the cable and shows the locator’s
number
N Ethernet port indicator
O Wiremap diagram. The rightmost segments
indicate the shield.
P The Windicates a fault or high voltage on the
cable. SPLIT appears when the fault is a split
pair.
Changing the Length Units
1 Hold down Y and E while turning on the
tester.
2 Press M to switch between meters and feet.
Auto Shutoff
The tester turns off after 10 minutes if no keys are
pressed and nothing changes at the tester’s
connectors.