User Manual

Using the Toner
35
Analog Toner Mode (optional tone probe
required)
Refer to Figure 26.
1 Connect the tester to the cable.
2 Press Y to select twisted pair or coaxial cable.
3 Press M until L appears on the display ( A ); then
press
D to enter analog toner mode. The display shows
a scrolling sinewave in analog toner mode (
B ).
4 To change songs, press D. The display shows the song
number ( C ). The analog toner has four songs.
If you press
D or E repeatedly, the tester cycles
through the analog and IntelliTone songs.
5 Use the probe to search for the cable.
egk25.eps
Figure 26. Analog Toner Mode Display
A
B
C