User Manual

MicroScanner
2
Cable Verifier
Users Manual
12
Twisted Pair Test Results
The following figures show typical test results for twisted
pair cabling.
Open on Twisted Pair Cabling
Figure 6 shows an open on wire 4.
Notes
If only one wire in a pair is open and a wiremap
adapter or remote ID locator is not connected, both
wires are shown as open.
The warning icon (
W) does not appear if both
wires in a pair are open because open pairs are
normal for some cabling applications.
The three segments shown for the wire pair length indicate
the open is approximately 3/4 the distance to the end of the
cabling. The cable length is 75.4 m.
To see the distance to the open, use E or D to view the
individual result for the wire pair. See page 20.
egk05.eps
Figure 6. Open on Twisted Pair Cabling