User Manual

MicroScanner
2
Features
7
A On/off key.
B E, D: Navigates through screens and changes
settings. In toner mode, these keys cycle through the
IntelliTone and analog toner songs.
C Y: Selects the RJ45 or coaxial connector as the active
port.
D M: Cycles through the cable test, toner, and PoE
detect modes.
For additional modes, hold down keys while turning the
tester on:
• Y + E: Lets you calibrate length measurements and
select meters or feet as the length unit.
• M + D: Activates a demonstration mode where the
tester shows examples of test result screens.
Note
Auto shutoff is disabled in demonstration mode.
• E + D: Displays the version and serial number
screens.
E LCD display with backlight.
F F-connector for connecting to 75 Ω coaxial cable.
G Modular jack for connecting to telephone and twisted
pair network cable. The jack accepts 8-pin modular
(RJ45) and
6-pin modular (RJ11) connectors.
H Wiremap adapter with F-connector and 8-pin modular
jack. See page 10.
I Optional remote ID locator with F-connector and 8-pin
modular jack. See page 10.