Operation Manual

LinkWare Cable Test Management Software
Getting Started Guide
28
Creating Circuit ID Lists for an OMNIScanner Tester
The OMNIScanner Configuration utility lets you create circuit ID lists as part of
an OMNIScanner project.
To create an ID list for an OMNIScanner Tester
1 Select Utilities > OMNIScanner Utilities > Configuration on
the LinkWare toolbar.
Edit Project
Library
button
2 Click the Edit Project Library button; then click Create.
3 In the subsequent dialog boxes, enter a name for the
project and make appropriate choices for the Autotests and
cables required for the project.
4 In the Circuit ID Dialog box, enter values for the First
Circuit ID and the Last Circuit ID. Click OK when your are
finished
Create a New
Configuration
button
5 Click OK until you return to the OMNIScanner
Configuration window.
6 To add your project to a configuration you can download to
the tester, click the Create a New Configuration button.
7 In the subsequent dialog boxes, enter a name for the
configuration, add the project you created, and select other
options as necessary.
See the online help in the Configuration utility for details
on downloading configurations to the tester.