Operation Manual

LinkWare Cable Test Management Software
Getting Started Guide
26
To save the ID list on the PC for downloading to the tester later
Click Save ID List.
To download the list to the tester
1 Connect the tester to the PC and turn on the tester.
2 Click To DTX.
To use the ID list in the DTX tester
Select List as the Cable ID Source; then select the name of the list you
downloaded.
Creating Cable ID Lists for a DSP-4300
The Create ID List utility lets you create lists of cable IDs and save them on a
memory card for use in a DSP-4300. You can also save the lists on the PC to
move to a memory card later.
To create an ID list for a DSP-4300 tester
1 Connect the memory card reader to a PC and insert a memory card into the
reader.
2 Select Utilities > DSP-4x00 Utilities > Create ID List from the LinkWare
menu.
3 Note the guidelines for cable IDs given near the top of the Create Custom
ID List dialog box.
Enter IDs as follows:
Note
LinkWare changes all letters to upper case to match the letters
available in the tester.
To add individual IDs to the list
Enter a cable ID in the editing box next to the Enter ID button. Click Enter
ID to add the ID to the list.
To create a list of sequential IDs
Click Build Sequence. LinkWare builds an ID list by incrementing the
characters in your start ID from right to left until the end ID is reached.
To copy an ID from the list to the editing box
Click on the ID in the list.