Operation Manual

LinkWare Cable Test Management Software
Getting Started Guide
6
• Use the level currently selected in the database structure pane
This option places all the imported records at the currently-selected
level or at a lower level if one is defined by the tester’s organization.
This option is not available if a level is not currently selected.
• Define the fields used in the cable IDs
This option lets you tell the Import Wizard which cable ID characters
were used to represent the elements in the cabling installation.
If you select this option, click Define cable ID fields to define the fields.
This option gives you the following choices:
Use the following delimiter to separate the cable ID fields
Choose this option if the cable ID fields are separated by dashes,
slashes, periods, or any other delimiter (for example C.A5.23). Enter the
delimiter in the box. If the IDs use more than one type of delimiter, use
the other option.
After you enter the delimiter, use the Field Number boxes to define
which ID field represents which element in the installation. You do not
need to define fields for all the elements listed.
Click OK when you are finished.
Define location of the characters for each field in the cable ID
Choose this option if the cable ID fields are not separated by a
delimiter (for example, CA523), or if the IDs use more than one type of
delimiter (for example, C/A5-23).
Use the Position of First Character and Number of Characters boxes to
define the positions and lengths of cable ID fields. You do not need to
define fields for all the elements listed.