Quick Start Guide

5
Meter Display Features
F Numeric display with units for loss (dB) and power
measurements (mW, µW, dBm).
G Numeric display for the wavelength.
H FindFiber
™
: Indicates the meter is testing for a FindFiber
source. ID is the label for the source’s identification
number, which appears on the numeric display (
F ). See
page 9.
I POWER: The meter is measuring power. See page 10.
J LOSS: The meter is measuring power loss. See page 11.
K B: Low battery indicator. See page 3.
L 2 kHz: The meter detects a 2 kHz modulated optical signal.
See the Users Manual.
M U: The meter is connected to a PC through the USB port.
See the Users Manual.
N AUTO: The meter detects a wavelength identifier in the
optical signal. See page 7.
O OK O: The operation succeeded (OK) or failed O.
P Max Min: Indicators for maximum (Max) and minimum
(Min) power measurements. See the Users Manual.
Q DELETE?: Indicates that pressing T deletes the current
record. DELETE ALL? indicates that pressing
T deletes all
records. See page 14.
R SET REF: Indicates that pressing T saves the power
measurement as the reference value. See page 11.
S V: Indicates that pressing S changes the wavelength
being measured.