Quick Start Guide

2
SimpliFiber Pro Getting Started Guide
Meter and Source Features
ffk01.eps
A X: On/off key.
B R S T: Softkeys, which provide functions related to the
current display. The funtions are displayed above the keys.
C M: Selects the meter’s measurement mode. To enter setup
mode, hold down M for 4 seconds. See page 6.
D LCD display.
E Input port with interchangeable connector adapter. See
page 7.
F USB port for uploading test records to a PC. See the Users
Manual.
G A: Selects auto wavelength mode. The AUTO LED lights.
Press
Z to change the wavelength. The wavelength LEDs
indicate the wavelength. See page 7.
H M: Switches between continuous wave and 2 kHz
modulated output signals. The CW/2 kHz LED lights if