Instructions
Table Of Contents
- SimpliFiber Pro Users Manual
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Contents
- List of Figures
- Introduction
- Registration
- The Fluke Networks Knowledge Base
- Contacting Fluke Networks
- Safety Information
- Battery Installation, Life, and Status
- Meter and Source Features
- Display Features
- Setting User Preferences
- Continuous Wave/2 kHz Modes
- Auto Wavelength Mode
- Cleaning Connectors and Adapters
- Changing the Connector Adapter
- Detecting Active Fibers
- Locating Fibers
- Measuring Optical Power
- Measuring Loss
- Memory Functions
- Maintenance
- Options and Accessories
- Specifications
- Appendix A: How to Test Your Test Reference Cords
- Appendix B: Using Mandrels
- Appendix C: Fiber Test Method Names
- Appendix D: Loss Test Methods
- Index
SimpliFiber Pro Meter and Test Kits
Users Manual
34
Meter Specifications (cont.)
Display resolution, dB or dBm 0.01 dB
Power display units dBm, mW, μW
Auto-wavelength detection Yes
Record storage 1000 records, multiple wavelengths per record, sequential-number ID
External interface USB 2.0, full speed
Optical connector Removable adapter. SC adapter is standard. Optional adapters include LC, ST, FC
FindFiber ID detection Yes
Power requirement 2 AA alkaline batteries
Battery life
4
>50 hours (typical)
Automatic power-off 10, 20, 30, or 60 minutes (can be disabled by the user)
Low battery warning Low battery icon blinks
Calibration cycle 1 year
Dimensions 6.4 in x 3.2 in x 1.5 in (16.5 cm x 8.0 cm x 3.9 cm)
Weight 11.5 oz (325 g)
4. Measured power levels 0 dBm. Battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline
batteries.