Instructions
Table Of Contents
- SimpliFiber Pro Users Manual
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Contents
- List of Figures
- Introduction
- Registration
- The Fluke Networks Knowledge Base
- Contacting Fluke Networks
- Safety Information
- Battery Installation, Life, and Status
- Meter and Source Features
- Display Features
- Setting User Preferences
- Continuous Wave/2 kHz Modes
- Auto Wavelength Mode
- Cleaning Connectors and Adapters
- Changing the Connector Adapter
- Detecting Active Fibers
- Locating Fibers
- Measuring Optical Power
- Measuring Loss
- Memory Functions
- Maintenance
- Options and Accessories
- Specifications
- Appendix A: How to Test Your Test Reference Cords
- Appendix B: Using Mandrels
- Appendix C: Fiber Test Method Names
- Appendix D: Loss Test Methods
- Index
Memory Functions
31
Uploading Records to a PC
1
Install the latest version of LinkWare PC software on
your PC. Download LinkWare PC from the Fluke
Networks website.
2
Turn on the meter.
3
Connect the meter to the PC with the USB cable
provided, as shown in Figure 14.
4
Start LinkWare PC software on the PC.
5
Click Import on the LinkWare PC tool bar; then
select SimpliFiber Pro.
6
Enter project information; then click OK.
7
Import all records from the meter or select records to
import.
Note
The meter’s record numbers are in the Cable ID
colu
mn in
LinkWare PC.
8
To delete all records in the tester, select Utilities >
SimpliFiber Pro > Delete All Tests in Memory.
USB cable
ffl22.eps
Figure 14. Connecting to a PC