Instructions
Table Of Contents
- SimpliFiber Pro Users Manual
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Contents
- List of Figures
- Introduction
- Registration
- The Fluke Networks Knowledge Base
- Contacting Fluke Networks
- Safety Information
- Battery Installation, Life, and Status
- Meter and Source Features
- Display Features
- Setting User Preferences
- Continuous Wave/2 kHz Modes
- Auto Wavelength Mode
- Cleaning Connectors and Adapters
- Changing the Connector Adapter
- Detecting Active Fibers
- Locating Fibers
- Measuring Optical Power
- Measuring Loss
- Memory Functions
- Maintenance
- Options and Accessories
- Specifications
- Appendix A: How to Test Your Test Reference Cords
- Appendix B: Using Mandrels
- Appendix C: Fiber Test Method Names
- Appendix D: Loss Test Methods
- Index
Setting User Preferences
11
Table 3. Meter Setup Items
Meter Setup Item Choices
Enab
le or disable Min Max mode for power measurements.
mW µW dBm Select a unit for power measurements: milliwatts (mW), microwatts (μw), or decibels
relative to 1 mW (dBm).
Turn the backlight off or on.
Select a time period for the meter to turn off automatically if no keys are pressed. The
meter will not turn off if
it is connected to a source that is in AUTO or ID mode.
Dashes ( ) indicate auto power-off is disabled.