Instructions
Table Of Contents
- SimpliFiber Pro Users Manual
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Contents
- List of Figures
- Introduction
- Registration
- The Fluke Networks Knowledge Base
- Contacting Fluke Networks
- Safety Information
- Battery Installation, Life, and Status
- Meter and Source Features
- Display Features
- Setting User Preferences
- Continuous Wave/2 kHz Modes
- Auto Wavelength Mode
- Cleaning Connectors and Adapters
- Changing the Connector Adapter
- Detecting Active Fibers
- Locating Fibers
- Measuring Optical Power
- Measuring Loss
- Memory Functions
- Maintenance
- Options and Accessories
- Specifications
- Appendix A: How to Test Your Test Reference Cords
- Appendix B: Using Mandrels
- Appendix C: Fiber Test Method Names
- Appendix D: Loss Test Methods
- Index
Display Features
9
: Low battery indicator. See page 5.
2 kHz: The meter detects a 2 kHz modulated optical
signal. See page 12.
: The meter is connected to a PC through the USB
port. See page 31.
AUTO: The meter detects the auto wavelength
identifier in the optical signal. See page 12.
OK : The operation succeeded (OK) or failed .
Max Min: Indicators for maximum (Max) and minimum
(Min) power measurements. See page 22.
DELETE?: Indicates that pressing deletes the current
record. DELETE ALL? indicates that pressing deletes
all records. See page 29.
SET REF: Indicates that pressing saves the power
measurement as the reference value. See page 23.
: Indicates that pressing changes the wavelength
being measured.