Instructions
Table Of Contents
- SimpliFiber Pro Users Manual
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Contents
- List of Figures
- Introduction
- Registration
- The Fluke Networks Knowledge Base
- Contacting Fluke Networks
- Safety Information
- Battery Installation, Life, and Status
- Meter and Source Features
- Display Features
- Setting User Preferences
- Continuous Wave/2 kHz Modes
- Auto Wavelength Mode
- Cleaning Connectors and Adapters
- Changing the Connector Adapter
- Detecting Active Fibers
- Locating Fibers
- Measuring Optical Power
- Measuring Loss
- Memory Functions
- Maintenance
- Options and Accessories
- Specifications
- Appendix A: How to Test Your Test Reference Cords
- Appendix B: Using Mandrels
- Appendix C: Fiber Test Method Names
- Appendix D: Loss Test Methods
- Index
Meter and Source Features
7
: On/off key.
: Softkeys, which provide functions related to
the current display. The funtions are displayed above
the keys.
: Selects the meter’s measurement mode. To enter
setup mode, hold down
for 4 seconds. See page 10.
LCD display.
Input port with interchangeable connector adapter. See
page 14.
USB port for uploading test records to a PC. See page 31.
: Selects auto wavelength mode. The AUTO LED
lights. Press
to change the wavelength. The
wavelength LEDs indicate the wavelength. See page 12.
: Switches between continuous wave and 2 kHz
modulated output signals. The CW/2 kHz LED lights if
the output is continuous. It blinks if the output is
modulated. See page 12.
Also enables or disables auto power-off. See page 10.
: Selects FindFiber mode. The ID LED lights if the
source is in FindFiber mode. See page 18.
The LOW BATTERY LED blinks continuously if the
battery is low. The LED blinks occasionally if auto power-
off is disabled. See page 10.
Output port with SC adapter.