Instructions

Safety Information
3
Warning: Class 1 Laser (singlemode and
FindFiber sources)

To avoid possible eye damage caused by hazardous
radiation and to prevent possible fire, electric
shock, or personal injury:
 Read all safety information before you use the
Product.
 Carefully read all instructions.
 Do not open the case. You cannot repair or replace
parts in the case.
 Do not modify the Product.
 Use only replacement parts that are approved by
Fluke Networks.
 Do not use the Product around explosive gas,
vapor, or in damp or wet environments.
 Use this Product indoors only.
 Use the Product only as specified, or the protection
supplied by the Product can be compromised.
 Do not use and disable the Product if it is damaged.
 Do not use the Product if it operates incorrectly.
 Have an approved technician repair the Product.
 Never look directly into optical connectors. Some
sources produce invisible radiation that can
permanently damage your eyes.
 Never turn on the source unless a fiber is attached
to the port.
 Do not use magnification to view the optical
outputs without proper filtering.
 Use of controls, adjustments, or procedures not
stated herein might result in hazardous radiation
exposure.
 Batteries contain hazardous chemicals that can
cause burns or explode. If exposure to chemicals
occurs, clean with water and get medical aid.
 Remove the batteries if the Product is not used for
an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are not
removed, battery leakage can damage the Product.
 The battery door must be closed and locked before
you operate the Product.