Instructions
Table Of Contents
- SimpliFiber Pro Getting Started Guide
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Contents
- Accessing the Users Manual
- Safety
- Meter and Source Features
- Battery Installation, Life, and Status
- Meter Display Features
- Setting User Preferences
- Auto Wavelength Mode
- Cleaning Connectors and Adapters
- Changing the Connector Adapter
- Testing Your Test Reference Cords
- Detecting Active Fibers
- Locating Fibers
- Measuring Power
- Measuring Loss
- Memory Functions
- Contacting Fluke Networks
5
Meter Display Features
Numeric display with units for loss (dB) and power
measurements (mW, µW, dBm).
Numeric display for the wavelength.
FindFiber
™
: Indicates the meter is testing for a FindFiber
source. ID is the label for the source’s identification
number, which appears on the numeric display (
). See
page 9.
POWER: The meter is measuring power. See page 10.
LOSS: The meter is measuring power loss. See page 11.
: Low battery indicator. See page 3.
2 kHz: The meter detects a 2 kHz modulated optical signal.
See the Users Manual.
: The meter is connected to a PC through the USB port.
See the Users Manual.
AUTO: The meter detects a wavelength identifier in the
optical signal. See page 7.
OK : The operation succeeded (OK) or failed .
Max Min: Indicators for maximum (Max) and minimum
(Min) power measurements. See the Users Manual.
DELETE?: Indicates that pressing deletes the current
record. DELETE ALL? indicates that pressing
deletes all
records. See page 14.
SET REF: Indicates that pressing saves the power
measurement as the reference value. See page 11.
: Indicates that pressing changes the wavelength
being measured.