Instructions
Table Of Contents
- SimpliFiber Pro Getting Started Guide
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Contents
- Accessing the Users Manual
- Safety
- Meter and Source Features
- Battery Installation, Life, and Status
- Meter Display Features
- Setting User Preferences
- Auto Wavelength Mode
- Cleaning Connectors and Adapters
- Changing the Connector Adapter
- Testing Your Test Reference Cords
- Detecting Active Fibers
- Locating Fibers
- Measuring Power
- Measuring Loss
- Memory Functions
- Contacting Fluke Networks
2
SimpliFiber Pro Getting Started Guide
Meter and Source Features
ffk01.eps
: On/off key.
: Softkeys, which provide functions related to the
current display. The functions are displayed above the
keys.
: Selects the meter’s measurement mode. To enter setup
mode, hold down for 4 seconds. See page 6.
LCD display.
Input port with interchangeable connector adapter. See
page 7.
USB port for uploading test records to a PC. See the Users
Manual.
: Selects auto wavelength mode. The AUTO LED lights.
Press to change the wavelength. The wavelength LEDs
indicate the wavelength. See page 7.
: Switches between continuous wave and 2 kHz
modulated output signals. The CW/2 kHz LED lights if