Instructions
Table Of Contents
- SimpliFiber Pro Getting Started Guide
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Contents
- Accessing the Users Manual
- Safety
- Meter and Source Features
- Battery Installation, Life, and Status
- Meter Display Features
- Setting User Preferences
- Auto Wavelength Mode
- Cleaning Connectors and Adapters
- Changing the Connector Adapter
- Testing Your Test Reference Cords
- Detecting Active Fibers
- Locating Fibers
- Measuring Power
- Measuring Loss
- Memory Functions
- Contacting Fluke Networks
14
SimpliFiber Pro Getting Started Guide
6
If you want the source to automatically switch wavelengths,
press
until the wavelength LEDs blink alternately.
7
To save the measurement, press SAVE.
If the source was automatically switching wavelengths, the
meter saves measurements for all wavelengths in one
record.
Memory Functions
The meter stores up to 1000 loss or power records.
If memory is full, the meter shows when you try to
save a measurement.
To view records, press until VIEW RECORD appears.
Press or to scroll up or down through records.
To delete the record you are viewing, press DELETE
twice.
To delete all records, hold down DELETE until DELETE
ALL? appears; then press again.
Deleted records show in the numeric display.
To upload records to a PC, use LinkWare
™
PC software and
the USB cable provided. See the Users Manual.