Operation Manual

DTX Series CableAnalyzer
Technical Reference Handbook
3-2
amd41f.eps
Figure 3-1. Twisted Pair Reference Connections for the
DTX-1800, DTX-1200, and DTX-LT
ezz01.eps
Figure 3-2. Twisted Pair Reference Connections for the
DTX-ELT and DTX-CLT
Testing Twisted Pair Patch Cords
Because up to 70 % of Cat 5e and Cat 6 patch cords fail to
meet TIA requirements, Fluke Networks recommends
testing patch cords before using them with your tester or in
a network.
Patch cord testing requires the optional DTX-PCU6S Patch
Cord Adapter Set. Contact Fluke Networks or visit the Fluke
Networks website for more information.
Note
The DTX-PCU6S Patch Cord Adapter Set is not
compatible with the DTX-ELT.
Permanent link
adapter
Channel
adapter
TEST
LOW BATTERY
TONE
TALK
FAIL
TEST
PASS
TALK
TALK
MONITOR
ENTER
TEST
SAVE
SPECIAL
FUNCTIONS
SETUP
AUTO
TEST
SINGLE
TEST
EXIT
F1 F2
F3
TEST
LOW BATTERY
TONE TAL K FAIL TEST
PAS S
TALK
TALK
MONITOR
ENTER
TEST
SAVE
SPECIAL FUNCTIONS
SETUP
AUTO
TEST
SINGLE
TEST
EXIT
F1 F2 F3
DTX-REFERENCE module