Operation Manual

DTX Series CableAnalyzer
Technical Reference Handbook
2-12
Step 5: Saving the Results
5-1 Press N.
5-2 Use the text editing screen to enter a name for the
results. See Figure Figure 2-1 on page 2-3 for details on
editing text.
5-3 Press N when you are done.
This concludes the tutorial on testing twisted pair cabling.
For more information on testing twisted pair cabling, see
Chapter 3.
Certifying Fiber Cabling
Note
The fiber modules are not compatible with the
DTX-ELT.
This section familiarizes you with the optional DTX-MFM2,
DTX-GFM2, and DTX-SFM2 fiber modules and the DTX-CLT
CertiFiber tester by guiding you through the following
tasks:
• Installing fiber modules
• Checking the battery status and verifying operation
with the fiber modules
• Setting a reference in Smart Remote mode
• Running an Autotest in Smart Remote mode
• Viewing the Autotest results
• Saving the results
Required Equipment
Figure 2-7 shows the equipment for testing fiber cabling in
Smart Remote mode.