Operation Manual

13-1
Chapter 13: Memory Functions
Storage Locations and Capacities
All DTX Series testers can store up to 250 Cat 6 Autotest
results, including graphical data, in internal memory.
The maximum capacity of internal memory depends on the
space taken by the tester’s software.
The DTX-1800 and DTX-1200 can store up to 4,000 Autotest
results, including graphical data, on a 128 MB removable
memory card.
The DTX-1800 and DTX-1200 testers can use Multi Media
Card (MMC) or Secure Digital memory cards (SD).
WCaution
Memory cards may be lost, damaged, or
accidentally formatted, resulting in data loss.
Therefore, Fluke Networks recommends saving no
more than one day’s worth of test results on a
memory card.
Checking the Memory Status
To check the memory status, turn the rotary switch to
SPECIAL FUNCTIONS, use
D to highlight Memory
Status; then press
H.
Or, press
L Memory from the main Autotest screen.
Figure 13-1 describes the memory status screen.