Operation Manual

DTX Series CableAnalyzer
Technical Reference Handbook
12-2
4 On the Custom screen, select Use Default Values From,
select a cable group; then select a cable type as a
baseline for your custom cable type.
5 To change the NVP for your custom cable, select NVP
on the Custom screen. You may set the NVP to a
specified value, or determine the actual NVP of a
sample of cable. See "Changing the NVP" on page
12-10.
6 From the Custom screen, press N when you are done
creating the cable type.
The tester saves the custom cable type in the Custom list,
with asterisks (*) before and after the name.
Creating a Custom Twisted Pair Test Limit
You can create up to nine custom twisted pair test limits. A
custom twisted pair test limit includes the following
settings:
• Custom limit name
• Baseline limit for default settings
• Maximum length
• Resistance test enabled or disabled
• Insertion loss test enabled or disabled
• NEXT test enabled or disabled
• PS NEXT test enabled or disabled
• ACR-F test enabled or disabled
• PS ACR-F test enabled or disabled
• ACR-N test enabled or disabled
• PSACR test enabled or disabled
• Return loss test enabled or disabled