Operation Manual

Certifying Fiber Optic Cabling
Running Single Tests
8-61
8
Running Single Tests
The tester’s SINGLE TEST mode lets you run individual tests
for isolating cabling failures and quickly testing repairs.
In the SINGLE TEST mode, you can run and save the
following tests individually:
• Loss
• Length (includes propagation delay)
• Power meter measurement
Using the Remote Tester with an
OptiFiber Tester
You can use a DTX Series smart remote with a DTX-MFM2
or DTX-SFM2 fiber module as the remote for a Fluke
Networks OptiFiber
®
Certifying OTDR. The DTX remote
takes the place of a second OptiFiber tester for measuring
loss and length with the OptiFiber loss/length option in
Smart Remote mode. You can buy a smart remote
separately for this purpose. See the Fluke Networks website
or contact Fluke Networks for details.