Operation Manual

DTX Series CableAnalyzer
Technical Reference Handbook
8-54
Figure 8-26. Main Tester Results for FindFiber Test (Smart Remote Mode)
amd103f.eps
amd104f.eps
amd105f.eps
The main tester’s INPUT fiber path is
not complete.
If the main tester's OUTPUT fiber is
connected to the remote's INPUT port,
the remote's TEST LED blinks.
The main tester’s INPUT fiber path is
complete. The main tester’s OUTPUT
fiber path is not complete.
Both fiber paths are complete.
On the remote, the TEST and PASS
LEDs blink alternately.