Operation Manual

Certifying Fiber Optic Cabling
Autotest in Far End Source Mode
8-39
8
Figure 8-18. Equipment for Testing in Far End Source Mode (1 Jumper Method)
amd51f.eps
A Tester and smart remote with fiber modules and
connector adapters installed (match connector adapters
to the connectors in the link)
B Memory card (optional)
C Two AC adapters with line cords (optional)
D Test reference cord. Match the fiber to be tested. SC
connector at one end. Match the link connectors at the
other end.
E Test reference cord. Match the fiber and connectors in
the link.
F Singlemode adapter of the appropriate type.
G Mandrel. Recommended when testing multimode fiber
with DTX-MFM2 modules. See page 8-12.
H Fiber cleaning supplies
I A microscope for inspecting fiber connectors (the FT500
FiberInspector Mini Video Microscope is shown)