Operation Manual

DTX Series CableAnalyzer
Technical Reference Handbook
7-6
Using the Cradle
Figure 7-2 shows how to use the cradle to stand the tester up
on a flat surface when a DTX Compact OTDR module is
attached.
amd165.eps
Figure 7-2. Using the Cradle
Software Requirements
The following software supports the DTX Compact OTDR
module. Software upgrades are available on the Fluke
Networks website.
• DTX software: version 2.0 or higher.
• LinkWare software: version 3.0 or higher.
See the DTX CableAnalyzer Users Manual for instructions on
updating the tester’s software.
Notes
Update the software with the OTDR module
attached to the tester.
If your tester’s software version is lower than 2.0,
you will need to do the software update procedure
twice.